For all textiles in the interior as clothing, household textiles, seat covers and carpets. Consumption approx. 80 - 150 ml / m², pre-cleaning with textile cleaner
Prices incl. VAT plus shipping costs
High-performance textile coatings
You can effectively protect nearly all types of textiles from water, dirt and stain formation thanks to modern high-performance particles. Appearance, color fastness and feel will thereby not be impaired in any way. Textiles are easy to maintain and remain breathable. Damage through discoloration or stain formation caused by aqueous and greasy dirt are things of the past.
servFaces textile sealing ensures permanent protection with the most modern high-performance particles! The high-performance particles are very stable and work for up to 24 months!
This water-repellent high-performance coating effectively protects nearly all types of textiles from water, dirt and stain formation. It provides transparent, invisible and breathable protection with a long lifetime. Washing up to 50 times at 30° (always according to the product) is perfectly possible!
Areas of application:
For conventional textiles such as clothing, household textiles, seat covers and carpets
- Long-term protection
- Chemically resistant and environmentally stable
- Easy-to-clean surface
- Hydrophobic, oleophobic and dirt-repellent protective film
- Provides full protection of articles
- Free of flammable solvents
- Natural softness /flexible
The textile must be thoroughly cleaned before sealing to remove all dirt, care and impregnating agents. To do so, use Textil Cleaner. After cleaning, the textile must fully dry.
The surface needs to be wetted all over to form a thin, even wet film on the textile. Rub the product into the textile and then let it dry. Temporary darkening may occur always according to the coating thickness. Textiles can be treated by dipping or spraying. Dipping the yarn or fabric web into an immersion bath is also possible. You can obtain exceptional result with low amounts. The consumption depends on the absorbing capacity of the fiber.
The product releases its effects after full curing in the air. Curing can also be carried out using a fan heater, if the textile is suitable for it. Thermal curing increases the effectiveness.
Should fading occur, you can refresh the textile as much as with the first application, unless it is heavily soiled.
Caution: Do not apply the product in direct sunlight and do not let it dry!
Always according to the textile fiber, purpose of use and stress up to 24 months or max. 50 washing cycles at 30°C
Application temperature: +5°C to +40°C
Consumption: 80 to 150 ml per m² (always according to the type of textile)
Weatherproof after: 2 to 3 hours at +20°C
Fully cured after: approx. 24 hours always according to the textile and ambient temperature
pH resistance: Not specified
Storage temperature: +10°C to +25°C
Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original container
Caution: Protect the product from direct sunlight and freezing temperatures!
Emulsions and coating products need a certain period of time to bind to the surface and fully cure. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product properties.
General information about the product:
Factors such as the type of coating system, paint condition, product processing (preliminary cleaning, application temperature, curing time), etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.
Textile cleaner, leather and interior brush, professional vaporizer/sprayer??
Note after use:
Surfaces treated with sealers should principally always be cleaned as gently as possible, to avoid damaging or even eliminating the product properties. Avoid using strong cleaning agents with high pH or a large content of solvent. We therefore recommend cleaning with a pH-neutral all-round cleaner such as servFaces Allround Cleaner (Ready-to-Use)
This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.
|Field:||Cars, Motorbikes, Caravans, AERO, Boats and Yachts, Buses and Vans, Industry and Crafts, Household, Trains and Trams|
|Product Type:||Surface Coatings|
Datasheets on demand
You can place a request for data sheets.