servFaces - Suave | servFaces – Premium Car Care & Coating Products
Skip to main content Skip to search Skip to main navigation

PRODUCT DETAILS

PRODUCT DESCRIPTION

Suave – PSR-Technology, based on the latest polymer SiO2 resin technology from servFaces, forms an extremely resistant, glass-like, and highly flexible protective layer after curing, which permanently protects vehicle paintwork and enhances its appearance. The surface becomes significantly glossier and takes on a visibly deeper color effect, giving the paintwork more depth and brilliance – for a permanently high-quality finish.

The coated surface becomes noticeably more scratch-resistant, more resistant to chemicals and temperature changes, and extremely resistant to UV radiation and environmental influences. This effectively protects the paint surface from corrosion, abrasion, and the damaging effects of external influences. At the same time, the creation of micro-scratches is noticeably reduced – for a permanently well-maintained, high-quality look and optimal value retention.

Suave - PSR-Technology prevents damage by caustic and acidic products in the pH range of 1 - 13 on the transparent coat.

The gloss guarantee is 3 years when used professionally!

APPLICATION

  • Clean the surface with Surface Cleaner Ultima followed by Surface Cleaner Neutra to neutralize it. • Put the application cloth onto the applicator.
  • Apply 12 - 18 drops of Suave – PSR-Technology onto the application cloth and spread it quickly on the surface (a visible film should form). Apply component by component and maximum a half of the hood.
  • Let the product dry for approx. 1 - 3 minutes! (The time depends on the consumption, air humidity and ambient temperature). The longer the product reacts on the paint, the thicker the coating and the greater the protective and hydrophobic effects.
  • Remove excess with the first Special Coating Towel (peripheral areas first, then work from the outside in with straight quick motions).
  • Take another fresh Special Coating Towel and polish the surface (first the peripheral areas and then from the outside inwards using circular motions, without applying too much pressure).
  • Should streaks still be visible, take another fresh Special Coating Towel and repeat the procedure until the streaks are invisible (check with a light).
  • Recoating with Suave – PSR-Technology: possible after 20 minutes. Wait no longer than 35 minutes!
Caution: Do not apply the product in direct sunlight!



Note after use

The coating is fully cured after 9 - 10 days and provides comprehensive protection. Until then the coating is still sensitive to severe stress. Bird droppings and insect remains should therefore be gently removed as quickly as possible to avoid damage to the paint! The surface should not be exposed to any mechanical stress or heavy abrasion (e.g. automatic car washing or manual washing with a brush) in the first 14 days.




Care

Proper care can considerably extend the duration of the coating's protective effects! Make sure you use only care products with the same water-repellent properties as the coating. We do not recommend using additional hot-wax sealants (e.g. in a car wash) because wax covers the surface as an additional film and weakens the hydrophobic characteristics of the coating.

NOTES

Application temperature:   +15°C to +35°C
Application quantity:   3 - 5 ml per m²
Weatherproof:   after 18 - 24 h
Fully cured after:   9 - 10 days
pH resistance:   1 - 13
Storage temperature:   +10°C to +25°C
Storage and shelf life:   At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

NOTES

Application temperature: +15°C to +35°C
Application quantity: 3 - 5 ml per m²
Weatherproof: after 18 - 24 h
Fully cured after: 9 - 10 days
pH resistance: 1 - 13
Storage temperature: +10°C to +25°C
Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

REVIEWS


PRODUCT PROPERTIES

Corrosion prevention
Glossy surface with enhanced color depth
Long-lasting protection
PFAS-free
Preservation of paint value
Reduction of micro-scratches
Resistant to cleaning agents & environmental influences (pH 1 – 13)
Resistant to temperatures from -50°C to 690°C
Simple application
UV resistant and environmentally-stable
Water and dirt-repellent

AREAS OF APPLICATION

  • Car wrap & splinter protection films which are solvent stable
  • Gloss & matt coatings
  • Lacquered and powder-coated rims
  • Modern paint systems with transparent coats
  • Paint systems without transparent coat
  • Untreated or natural-finish plastic surfaces
Bildbeschreibung

LIFETIME

One layer of Suave – PSR-Technology has a lifetime of approx. 24 months. To achieve a longer protection time, you can apply more layers (see the Use section). Each additional layer enhances the lifetime by a further 6 - 7 months.

TO CONSIDER

Emulsions and coating products need a certain period of time to bind to the surface and fully cure after application. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can considerably reduce the product's properties.

GENERAL PRODUCT NOTE

Factors such as type of coating system, paint condition, product processing (preliminary cleaning, application temperature, curing time), etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

Flame: Flammable Corrosion: Corrosive Exclamation Mark: Health hazard/Hazardous to the ozone layer Health hazard: Serious health hazard
CLP-/REACH-Notice
Danger!
H225: Highly flammable liquid and vapour.
H302: Harmful if swallowed.
H304: May be fatal if swallowed and enters airways.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H412: Harmful to aquatic life with long lasting effects.
SF10461 - Regulation No. 1272/2008: Cyclosilazanes, di-Me, Me hydrogen, polymers with di-Me, Me hydrogen silazanes, reaction products with Hydrocarbons, C11-C14, n-alkanes, isoalkanes, cyclics, <2% aromatics 3-aminopropyltriethoxysilane.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P501: Dispose of contents/container to applicable legislation.

ACCESSORY

Skip product gallery

Zubehör

servFaces Surface Cleaner Ultima - for gentle cleaning of stubborn and common soiling on surfaces

Surface Cleaner Ultima

servFaces surface cleaning before sealing/coating
€19.00*

Content: 0.5 Liter (€38.00* / 1 Liter)

servFaces Surface Cleaner Neutra - for gentle cleaning of stubborn and common soiling on surfaces servFaces Surface Cleaner Neutra - for gentle cleaning of stubborn and common soiling on surfaces

Surface Cleaner Neutra

servFaces surface cleaning before sealing/coating
€15.00*

Content: 0.5 Liter (€30.00* / 1 Liter)

servFaces Application Cloth - so that all your vehicle surfaces can be professionally cleaned, polished, and sealed servFaces application cloth – for professional cleaning, polishing, and sealing of all vehicle surfaces to be treated

Applications Towels 10cm x 15cm

Special microfiber cloths for the processing of various surface coatings and glass seals.
€19.90*

Content: 50 Piece (€0.40* / 1 Piece)

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
servFaces applicator – for professional cleaning, polishing, and sealing of all vehicle surfaces to be treated

Applicators 80 x 40 x 23 mm

Application sponge for applying servFaces coatings.
€15.00*

Content: 10 Piece (€1.50* / 1 Piece)

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
servFaces - Premium Applicator Sponges - Applikatorschwamm zum Auftragen von Beschichtungen servFaces Premium Buffing Towels - so that all your vehicle surfaces can be professionally cleaned, polished, and sealed

Premium Applicator Sponges

Microfiber applicator
€11.90*

Content: 4 Piece (€2.98* / 1 Piece)

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
servFaces Applicator Mitt - so that all your vehicle surfaces can be professionally cleaned, polished, and sealed servFaces Applicator Mitt – so that all vehicle surfaces can be professionally cleaned, polished, and sealed.

Applicator Mitt

The servFaces Applicator Mitt guarantees uniform and cost-effective application of various servFaces coatings, car care products and waxes.
€8.90*

Content: 2 Piece (€4.45* / 1 Piece)

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
servFaces Special Coating Towel - so that all your vehicle surfaces can be professionally cleaned, polished, and sealed servFaces Special Coating Towel – for professional cleaning, polishing, and sealing of all vehicle surfaces you need to work on.

Special Coating Towels - Pack of 10

Microfiber cloths with seamless edge and special fiber structure
€16.00*

Content: 10 Piece (€1.60* / 1 Piece)

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.