Finish Polish

Microfine abrasive paste

servFaces Finish Polish is a silicone-free polish for the professional processing of dull coated surfaces and surfaces with minor scratches. It is ideally suited to scratch-resistant transparent coats thanks to its special high-performance grinding particles. It quickly removes surface scratches caused by conveyor tunnel systems and other similar signs of wear with a high-gloss and hologram-free finish. servFaces Finish Polish reliably removes grinding marks and striae caused by P2500 sandpaper.

Areas of application:

Suitable for paints on passenger cars, motorcycles, commercial vehicles, etc.

Properties:

Grinding grade: 6.0

Gloss grade: 8.0

Application:

Apply servFaces Finish Polish onto the surface to be treated and spread (Recommendation: with a servFaces Polishing pad V2 or V3 or Polishing pelt) and polish crosswise at max. 2,000 rev/min. The grinding effect can be adjusted by altering the pressure, abrasive medium and rotation speed. At the beginning of the grinding process, it is best to work with higher pressure and lower rotation speed (rotary polisher approx. 800 rev/min). Later, reduce the pressure and work to a high-polish at a higher rotation speed (rotary polisher approx. 1,500 rev/min). The last remnants of the polish can be easily removed with a servFaces microfiber cloth. Should any veils or marks occur after polishing, they can be removed with Ultra Fine Polish.

Caution: Do not apply the product in direct sunlight and do not let it dry!

Warning:

Shake well before use! Check for suitability and compatibility before use. Do not apply on hot surfaces and protect from excessive high and freezing temperatures.

Application temperature: +10°C to +30°C

Storage temperature: +10°C to +25°C

Consumption: 6 to 10 ml per m²

pH: Not specified

Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original container

Protect from direct sunlight and freezing temperatures!

Accessories:

Polishing pad V2, Polishing pad V3, Polishing pad RT/V2, Polishing pad RT/V3, Polishing pelt V1, Polishing pelt V2, Polishing pelt V3

This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.