Wet Seal & Care

Wet sealing

Wet Seal & Care is specially developed, silicone-free quick sealing for wet surfaces that provides active and long-lasting preservation based on the latest technology. It can be applied to all stressed and brand new surfaces such as paint, plastics and glass on automobiles, campers and exterior surfaces of yachts. The very simple and quick application guarantees the best gloss results and strong water-repellent properties.

The product can be used during car washing. It binds directly to the paint molecules, improves the surface dirt-repellent properties and forms a very thin and water-repellent protective film with a pleasant smoothness. To achieve the best results, the surface to be sealed should be cleaned (washed with servFaces Wash Concentrate). 

It is also ideal for the care of servFaces sealed surfaces.

Areas of application:

• Vehicles
• Yachts and boats
• Campers 
• Motorcycles

Properties:

• Good hydrophobicity
• Enhanced gloss and smoothness
• Resistant to weak acids and bases
• Simple and quick application
• Minimal consumption
• Streak-free gloss 
• Silicone-free

Lifetime:

Wet Seal & Care provides protection for approx. 6 to 8 weeks. Applications in a cycle of 2 to 3 weeks increases the protection by approx. 70 to 80 %.

Use:

Spray Wet Seal & Care after washing directly onto the wet surface (do not leave to dry). Afterwards, rinse the product thoroughly with a medium-heavy / soft water jet (high-pressure cleaner from a distance of 1.0 m to 1.5 m). Dry the surface with a microfiber cloth (servFaces Premium Drying Towel) afterwards.

Caution: Do not apply the product in direct sunlight and do not let it dry! 

Application temperature: +5°C to +40°C

Consumption: 15 to 20 ml/m²

Weatherproof after: 30 minutes 

Fully cured after: 12 hours 

pH resistance: 10.5

Storage temperature: +10°C to +25°C

Storage and shelf life: At least 18 months at ambient temperature in tightly sealed original container

Caution: Protect the product from direct sunlight and freezing temperatures!

Note:

Emulsions and coating products need a certain period of time to bind to the surface and fully cure. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application, can significantly reduce the performance of the product properties.

General information about the product:

Factors such as the type of coating system, paint condition, product processing (preliminary cleaning, application temperature, curing time), etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

Note after use:

Surfaces treated with paint care products should principally always be cleaned as gently as possible to avoid damaging or even removing the product properties. Avoid using strong cleaning agents with high pH or a large content of solvent. We therefore recommend cleaning with a pH-neutral shampoo.

This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.