Natural Hybrid Wax

Hybrid hard wax

Natural Hybrid Wax is a specially developed hybrid hard wax based on premium Carnauba wax (38%). This wax combined with hybrid polymers (62%) protects painted surfaces on automobiles, caravans and exterior surfaces of yachts. The very simple and quick application guarantees the best gloss results with very good hydrophobic effects.

It binds directly to the paint molecules, improves the surface dirt-repellent properties and forms a very thin, water-repellent protective film. 

Natural Hybrid Wax enhances gloss and color depth. For occasional care, you can treat the coated surface with servFaces Hybrid Spray Wax after washing. This will significantly extend the lifetime of the wax sealing.

Areas of application:

Painted surfaces on automobiles, bikes, caravans and exterior surfaces of yachts

Properties:

• Very good hydrophobic effects
• Enhanced gloss and smoothness
• Resistant to weak acids and bases
• Simple and quick application
• Minimal consumption
• Optimal for vehicles used every day

Use:

To achieve the best results, the surface to be sealed should be cool and dry. To obtain a clean and neutral surface before application, it is absolutely essential to do preliminary cleaning with Surface Cleaner Ultima and Surface Cleaner Neutra. Apply a thin layer of the product onto the surface with the servFaces applicator until you obtain a visible, continuous film. Let the wax work for approx. 15 - 40 minutes. After that, simply polish the wax with a servFaces Premium Buffing Towel until you obtain a high-gloss and streak-free result. Excess material or moderate streaks can be polished later with a fresh microfiber cloth.

Caution: Do not apply the product in direct sunlight and do not let it dry!

Lifetime:

Natural Hybrid Wax provides protection for approx. 6 - 12 months. To obtain a greater protection layer, an additional layer can be applied after 120 minutes.

Application temperature: +10°C to +40°C

Consumption: 10 g to 15 g per vehicle

Weatherproof after: approx. 2 to 3 hours

Fully cured after: approx. 24 hours

pH resistance: pH 10.5

Storage temperature: +10°C to +25°C

Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original container

Caution: Protect the product from direct sunlight and freezing temperatures!

Note:

Emulsions and coating products need a certain period of time to bind to the surface and fully cure after application. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can considerably reduce the product's properties.

General information about the product:

Factors such as type of coating system, paint condition, product processing (preliminary cleaning, application temperature, curing time), etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

Accessories:

Surface Cleaner Ultima, Surface Cleaner Neutra, Puck applicator, Premium Applicator Sponge, Premium Buffing Towels, Premium Allround Towels, Wash Concentrate, Hydro Seal, Hybrid Spray Wax

Note after use:

Surfaces treated with paint care products should principally always be cleaned as gently as possible to avoid damaging or even removing the product properties. Avoid using strong cleaning agents with high pH or a high content of solvents. We therefore recommend cleaning with a pH-neutral shampoo.

This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.