Hydro Ceramic Foam 

Snow Foam with long-term sealing

servFaces Hydro Ceramic Foam is a Snow Foam with sealing effects based on the latest "Hydro Ceramic" technology from servFaces.  The new preservative formulation ensures that its water and dirt repellent preservative effect on surfaces lasts for a long time. Thanks to the simple application, you get a very smooth and highly hydrophobic surface with deep gloss in a very short time.  

You can also use the product to care for vehicle surfaces protected with our paint sealants.  This extends the service life of  each coating.  

Areas of application: 

• Vehicles in motor-vehicle sector 
• Motorhomes 
• Motorcycles / Scooters 
• Boats   
• Lacquer, glass, metal and plastic surfaces  

Properties: 

• Strongly water-repellent 
• Increases gloss and smoothness  
• Resistant to weak acids and bases 
• Simple and fast processing 
• Minimal consumption 

Lifetime: 

Hydro Ceramic Foam’s protective & preservative function lasts about 8 – 10 weeks. 

Use: 

Very dirty surfaces must be cleaned before application (e.g., with Reactive Cleaner or Pre-Wash PLUS).  Dilute Hydro Ceramic Foam with water in a ratio of 1:5 - 1:15, depending on the desired effect, and spray onto a cool surface with a foam sprayer. Rinse off any excess with a strong jet of water (e.g., high-pressure cleaner). 

Caution: Do not apply the product in direct sunlight and do not let it dry

Dilution:  

• Snow Foam Gun:  1:5 - 1:15 concentration 
• Automatic wash: 3 to 5 % final dilution
• Hand sprayer:  2 - 5% concentration 

Application temperature: +5°C to +40°C

Storage temperature: +10°C to +25°C

pH: not defined

Storage and shelf life: at least 18 months at ambient temperature in tightly sealed original container 

Protect from direct sunlight and freezing temperatures! 

Note: 

Emulsions and coating products need a certain period of time to bind to the surface and fully cure.  Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can considerably reduce the product's effectiveness. 

General information about the product: 

Factors such as:  type of coating system, paint condition, product use (preliminary cleaning, application temperature, curing time) etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations in product properties cannot be excluded 

Container sizes: 

Accessories: 

Snow Foam Gun, Premium Wash Sponge, Wash Mitt, Special Drying Towel, Premium Drying Towel, Premium Hybrid Towel 

Note after use: 

Surfaces being treated with paint care products should always be cleaned as gently as possible to avoid reducing or even negating the product’s properties.  Avoid using strong cleaning agents with high pH or a high content of solvents. We therefore recommend cleaning with a pH-neutral shampoo. 

Gefahren- und Sicherheitshinweise

Danger

Hazard components:

Isotridecanol, ethoxylated (>= 2,5 EO); Siloxanes and Silicones, 3-[(2-aminoethyl)amino]propyl Me, di-Me; 1-Propanaminium, 3-amino-N-(carboxymethyl)-N,N-dimethyl-, N-C8-18 (even numbered) acyl derivs., hydroxides, inner salts

Contents according to Regulation (EC) No 648/2004:

5 % - < 15 % non-ionic surfactants, < 5 % amphoteric surfactants, perfumes, preservation agents (1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one, LAURYLAMINE DIPROPYLENEDIAMINE, Pyridine-2-thiol 1-oxide, sodium salt). 

This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.