Insect Remover (High-Concentrate)

Insect remover (highly concentrated)

Insect Remover (High-Concentrate) is a specially developed cleaning agent for the gentle removal of insect remains on glass, coatings, chrome and plastic surfaces (solvent-free). The traditional formulation opens thick and hard residues even faster and softens them to allow gentle removal without exposing the surface to stress. Insect Remover (High-Concentrate) has been tested for paint and plastic compatibility. It is ideal as a pre-cleaner for car washing and also removes oil, grease and carbon black.

Areas of application:

• Cleaning of all types of vehicles 
• Acryl glass / Polycarbonate
• Ideal for cleaning of servFaces-coated surfaces

Properties:

• Highly concentrated
• For paint and compatible with synthetic materials
• Suitable as a pre-cleaner 
• Protects material 

Use:

Spray the product thoroughly onto the dry and cool surface to be cleaned from a distance of approx. 20 cm and let it work for 2 - 5 minutes. Then simply gently wipe off the residues with water or a detergent solution (servFaces Wash Concentrate) and a soft sponge (servFaces Wash Mitt) or a wet microfiber cloth. Afterwards, rinse the surface with plenty of water or wash the vehicle as usual.

Caution: Do not apply the product in direct sunlight and do not let it dry!

Dilution:

Insect Remover (High-Concentrate) is a highly concentrated solution for professional applications. The concentrate is diluted with water to 1:5 up to 1:30, always according to the amount of dirt. The cleaning effects can be Improved by using hot water.

Application temperature: +5°C to +40°C

Storage temperature: +10°C to +25°C

Consumption: 10 to 15 ml per m²

pH: 11.5

Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original container

Protect from direct sunlight and freezing!

Accessories:

Premium Wash Sponge, Premium Wash Mitt, Special Drying Towel, Premium Drying Towel, Hybrid Towel

Note:

After blending, highly concentrated cleaning agents should always be tested for material compatibility on a concealed spot!

This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.