Fast Shine - 3 in ONE

Surface cleaner with preservation effects

Fast Shine - 3 in ONE is a specially developed, oil-free silicone surface cleaner with active preservation effects. It can be applied on all stressed and brand new surfaces such as paint, plastics and glass on automobiles, campers and exterior surfaces of yachts. The very simple and quick application guarantees the best gloss results.

The product removes lime stains after car washing. It binds directly to the paint molecules, improves the surface dirt-repellent properties and forms a very thin and water-repellent protective film. The product can be used on dry and wet (with a minimum reduction in performance) surfaces. To achieve the best results, the surface to be sealed should be cool and dry.

Ideal for quick cleaning and care of exhibition vehicles and exhibits

Areas of application:

• Detail spraying
• Dry washing
• Quick sealing

Properties:

• Good hydrophobicity
• Enhanced gloss and smoothness
• Resistant to weak acids and bases
• Simple and quick application
• Minimal consumption
• Silicone oil-free

Use:

Spray the product sparingly on the surface and polish with a servFaces Premium Buffing Towel until you achieve a high-gloss and streak-free result. Excess material or moderate streaks can be polished off later with a fresh microfiber cloth (Premium Buffing Towel).

Caution: Do not apply the product in direct sunlight and do not let it dry!

Lifetime:

Fast Shine - 3 in ONE provides protection for approx. 6 to 8 weeks. To achieve a longer lifetime, an additional layer can be applied after 60 minutes.

Application temperature: +5°C to +30°C

Consumption: 5 to 15 ml per m²

Weatherproof after: 30 minutes

Fully cured after: 12 hours 

pH resistance: pH 10.5

Storage temperature: +10°C to +25°C

Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original container

Caution: Protect the product from direct sunlight and freezing temperatures!

Note:

Emulsions and coating products need a certain period of time to bind to the surface and fully cure after application. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product properties.

General information about the product:

Factors such as the type of paint systems, paint condition, product processing (preliminary cleaning, application temperature, curing time), etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

Note after use:

Surfaces treated with paint care products should principally always be cleaned as gently as possible to avoid damaging or even removing the product properties. Avoid using strong cleaning agents with high pH or a high content of solvents. We therefore recommend cleaning with a pH-neutral shampoo.

This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.