Skip to main content Skip to search Skip to main navigation

PRODUCT DETAILS

PRODUCT DESCRIPTION

servFaces Water Spot EXX gently and effectively removes water stains from all exterior vehicle surfaces. Limescale or mineral salts are often the cause of water stains on vehicle surfaces. Thanks to the adhesion-optimized acid-based formula, the surface remains wetted during the entire exposure phase. This gently dissolves the limescale, resulting in a stain-free finish.

APPLICATION

Spray onto a previously cleaned, dry, and cool surface and allow it to work for a short time. For heavy water stains, additionally treat with a sponge or microfiber cloth to increase cleaning performance. Rinse the surface thoroughly with water to remove any product residue.

If spots are still visible after application, it could be because the mineral deposits have already damaged the paint. These damages cannot be removed with Water Spot EXX, but only with a polish.

Caution: Do not use in direct sunlight or on hot surfaces! Process the product quickly and do not let it dry!

NOTES

Application temperature:   +5 °C to +40 °C
pH :   2.1 - 2.3
Storage temperature:   +10 °C to +25 °C
Storage and shelf life:   At least 18 months at ambient temperature in tightly sealed original containers, with containers standing upright.

NOTES

Application temperature: +5 °C to +40 °C
pH : 2.1 - 2.3
Storage temperature: +10 °C to +25 °C
Storage and shelf life: At least 18 months at ambient temperature in tightly sealed original containers, with containers standing upright.

REVIEWS


PRODUCT PROPERTIES

Acidic
Adhesion-optimized formula for vertical surfaces
Non-hazardous
Removes water stains on all exterior vehicle surfaces
Short exposure time
Without hydrofluoric acid, without hydrochloric acid

AREAS OF APPLICATION

  • Painted surfaces (matt and gloss paint)
  • Surfaces made of plastic, glass or metal
Bildbeschreibung

PH

2.1 - 2.3

TO CONSIDER

If spots are still visible after application, it could be because the mineral deposits have already damaged the paint. These damages cannot be removed with Water Spot EXX, but only with a polish.

GENERAL PRODUCT NOTE

This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.

DOWNLOADS

  • Datasheet
  • Safety datasheets request
EUH210: Safety data sheet available on request.
Further labeling
SF10464 - Contents according to Regulation (EC) No 648/2004: < 5 % phosphates, < 5 % non-ionic surfactants

HÄUFIG GESTELLTE FRAGEN

HÄUFIG GESTELLTE FRAGEN

Water Spot EXX can also be applied to permanently coated surfaces. However, it is not suitable for surfaces sealed with wax due to its pH value.

Water Spot EXX can be left on for up to several minutes. However, it should not be allowed to dry. If the product does dry and slight residue remains, the surface must be polished.

ACCESSORY

Skip product gallery

Accessory

Premium Wash Sponge - A super soft wash sponge

Super-gentle Wash Sponge
Variants from €8.90*
€15.50*

Premium Wash Mitt

Premium washing glove
€15.50*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

servFaces Scrubber Pad

For cleaning work on leather, textiles and plastic
€5.90*

servFaces Scrubber Pad

For cleaning work on leather, textiles and plastic
€5.90*

servFaces Scrubber Pad

For cleaning work on leather, textiles and plastic
€5.90*

Premium Buffing Towels

Rimless & long-pile microfiber cloth for removing waxes, polishes and paint care products and for cleaning work
€11.90*

Content: 3 Piece (€3.97* / 1 Piece)

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.