Skip to main content Skip to search Skip to main navigation

PRODUCT DETAILS

PRODUCT DESCRIPTION

We offer you the greatest sealing protection for glass surfaces thanks to modern high-performance particles. servFaces Vitro Ultima binds directly to the glass molecules and considerably improves the dirt-repellent performance of the glass surface. The product has special surface functions and strong water-repellent properties. 

Surface optimization on vehicles with the servFaces Vitro product line provides a clear view even in unexpected heavy rain. Protect yourself, your environment and take care for better road safety.

 

What is self-cleaning glass? 

Self-cleaning glass means that the nanocoating itself removes a great deal of dirt with the help of the sun and rain. The hydrophobic glass surface can also be cleaned with a common glass cleaner without impairing or damaging the protective film.

Caution:  Avoid using abrasive cleaning agents.

 

5 convincing reasons for surface optimization using servFaces Vitro

  • 50 % - less effort to apply the coating
  • 50 % - longer cleaning intervals
  • 50 % - reduced glass cleaning costs
  • 50 % - reduced work and scaffolding costs
  • 50 % - reduced cleaning agents 

 

servFaces Vitro Glassystem guarantees to halve glass cleaning costs and permanently protect your glass surfaces from dirt accumulation.

 

Areas of application:

Windscreen treatment:

  • Better view when it rains, especially on highways 
  • In winter: time consuming scraping off of ice reduced to a minimum
  • In summer: Mosquito remains are easier to remove/ easy-to-clean 

 

Constructions of different glass surfaces (e.g. conservatories, porches, skylights, etc.):

  • Extended cleaning cycle
  • Less cleaning agent necessary
  • Dirt is easier to remove

APPLICATION

  • Clean the glass surface with servFaces Glass Cleaner.
  • Use Vitro Polish after that to clean the glass surface right down into deep pores (please refer to the Vitro Polish datasheet for specific directions for use)
  • Clean the surface with Surface Cleaner Ultima followed by Surface Cleaner Neutra to neutralize. 
  • Put the application cloth onto the applicator.
  • Apply 12 to 18 drops on the application cloth and wipe a small section (approx. 40 x 40 cm) of the glass surface for approx. 1 to 2 minutes until it is polished to 90 %. Should the product dry too quickly, apply fresh product on the application cloth and repeat the procedure until the product is nearly invisible. 
  • After a short application time of approx. 2 - 5 minutes, remove any residues with a Special Coating Towel.

Caution: Do not apply the product in direct sunlight!


NOTES

Application temperature:   +10 °C to +35 °C
Application quantity:   3 - 5 ml per m²
Weatherproof after:   4 to 6 hours
Fully cured after:   24 hours
pH resistance:   2 - 13
Storage temperature:   +10 °C to +25 °C
Storage and shelf life:   At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

NOTES

Application temperature: +10 °C to +35 °C
Application quantity: 3 - 5 ml per m²
Weatherproof after: 4 to 6 hours
Fully cured after: 24 hours
pH resistance: 2 - 13
Storage temperature: +10 °C to +25 °C
Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

REVIEWS

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


PRODUCT PROPERTIES

Enhanced visibility and road safety
High resilience, long lifetime, higher efficiency
Preservation of the glass surface structure
Resistant to cleaning agents and environmentally-stable (pH 2-13)
Salt and lime repellent

AREAS OF APPLICATION

  • Glass surfaces (e.g. conservatories, porches, skylights, etc.)
  • Windscreen
Bildbeschreibung

LIFETIME

The self-cleaning layer is highly resistant and firmly bonded to the glass surface. The lifetime is therefore very long and can be up to 7 years on glass facades always according to the product selection. 

  • Windscreens: approx. 12 to 18 months
  • Side windows: 5 to 6 years

TO CONSIDER

Emulsions and coating products need a certain period of time to bind to the surface and fully cure. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product properties.

GENERAL PRODUCT NOTE

Factors such as preliminary cleaning, application temperature, curing time, etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

DOWNLOADS

  • Datasheet
CLP-/REACH-Notice
Symbol
Flame: Flammable Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P370 + P378: In case of fire: Use Kohlendioxid to extinguish.
P403 + P235: Store in a well-ventilated place. Keep cool.
P501: Dispose of contents/container to gemäß den behördlichen Vorschriften.
Further labeling
SF10209 - Contents according to Regulation (EC) No 648/2004: 5 % aliphatic hydrocarbons, preservation agents (1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one, LAURYLAMINE DIPROPYLENEDIAMINE, Pyridine-2-thiol 1-oxide, sodium salt).

ACCESSORY

Accessory Items

servFaces - Special Coating Towel - Mikrofasertuch servFaces - Special Coating Towel - Mikrofasertuch

Average rating of 5 out of 5 stars

Special Coating Towels - Pack of 10
Microfiber cloths with seamless edge and special fiber structure
€16.00*

Content: 10 Piece (€1.60* / 1 Piece)

servFaces - Applikator - Applikatorschwamm

Average rating of 0 out of 5 stars

Applicators 80 x 40 x 23 mm
Application sponge for applying servFaces coatings.
€15.00*

Content: 10 Piece (€1.50* / 1 Piece)

servFaces - Applikationstuch - Mikrofasertuch zum Auftragen von Beschichtungen

Average rating of 0 out of 5 stars

Applications Towels 10cm x 15cm
Special microfiber cloths for the processing of various surface coatings and glass seals.
€19.90*

Content: 50 Piece (€0.40* / 1 Piece)

servFaces - Surface Cleaner Ultima - Die korrekte Vorreinigung vor einer Beschichtung - 500 ml Flasche mit Sprühkopf

Average rating of 0 out of 5 stars

Surface Cleaner Ultima
servFaces surface cleaning before sealing/coating
€19.00*

Content: 0.5 Liter (€38.00* / 1 Liter)

servFaces - Surface Cleaner Neutra - Die korrekte Vorreinigung vor einer Beschichtung - 500 ml Flasche mit Sprühkopf

Average rating of 0 out of 5 stars

Surface Cleaner Neutra
servFaces surface cleaning before sealing/coating
€15.00*

Content: 0.5 Liter (€30.00* / 1 Liter)