Polishing Pad TS 7 PRO
| Hersteller: | servFaces GmbH |
| Artikel-Nr.: | SF10468 |
€5.90*
Delivery time: ca. 1-3 Days
PRODUCT DETAILS
PRODUCT DESCRIPTION
Das Polierpad TS 7 PRO (dunkelblau) ist speziell für die Anwendung mit Exzenter-Poliermaschinen entwickelt. Der mittel abrasive und offenzellige Polierschwamm ist mit unterschiedlichen Polituren kombinierbar und daher universell einsetzbar. Er ist besonders zur Entfernung von mittleren Kratzern und Lackdefekten auf leicht verwitterten Lackoberflächen geeignet. Durch seine Formstabile Eigenschaft behält das Polierpad bei langen Polierzeiten seine Polierleistung. Dies macht den Polierschwamm sehr langlebig, effizient und nachhaltig.
Properties & size chart
Properties
| Article | Recommended grinding pastes | Color | Shape | Material |
| TS 10 PRO | Heavy Cut | Grey | Trapezoidal shape with slightly rounded edge | Polyurethane foam, polyamide velour |
| TS 9 PRO | Heavy Cut | Green | ||
| TS 8 PRO | Medium Cut | Dark red | ||
| TS 7 PRO | Medium Cut, Fine Cut, ONE Cut | Dark blue | ||
| TS 5 PRO | Medium Cut, Fine Cut, One Cut | Orange | ||
| TS 3 PRO | Fine Cut, Ultra Fine Cut | Light blue |
Size chart
| Article | Art. No.: | Sponge size: | Velour size: | Mounting hole: | Content: |
| TS 7 PRO | SF10468 | Ø 100 mm, 22 mm hoch | Ø 80 mm | Ø 15 mm | 1 piece |
| TS 7 PRO | SF10468.1 | Ø 150 mm, 22 mm hoch | Ø 130 mm | Ø 22 mm | 1 piece |
| TS 7 PRO | SF10468.2 | Ø 170 mm, 22 mm hoch | Ø 155 mm | Ø 22 mm | 1 piece |
Care instructions:
Rinse off coarse polish residues by hand using lukewarm water. Gently knead the polish residues out of the pores with your thumbs. For deep cleaning, use an all-purpose cleaner such as Allround Cleaner or Multi Clean PLUS. Continue rinsing and kneading the polishing sponge until the water runs clear and no residues remain in the sponge. (Optional: Machine wash the polishing sponge at 40 °C.) After cleaning, shake the sponge thoroughly and allow it to air dry.
Properties & size chart
Properties
| Article | Recommended grinding pastes | Color | Shape | Material |
| TS 10 PRO | Heavy Cut | Grey | Trapezoidal shape with slightly rounded edge | Polyurethane foam, polyamide velour |
| TS 9 PRO | Heavy Cut | Green | ||
| TS 8 PRO | Medium Cut | Dark red | ||
| TS 7 PRO | Medium Cut, Fine Cut, ONE Cut | Dark blue | ||
| TS 5 PRO | Medium Cut, Fine Cut, One Cut | Orange | ||
| TS 3 PRO | Fine Cut, Ultra Fine Cut | Light blue |
Size chart
| Article | Art. No.: | Sponge size: | Velour size: | Mounting hole: | Content: |
| TS 7 PRO | SF10468 | Ø 100 mm, 22 mm hoch | Ø 80 mm | Ø 15 mm | 1 piece |
| TS 7 PRO | SF10468.1 | Ø 150 mm, 22 mm hoch | Ø 130 mm | Ø 22 mm | 1 piece |
| TS 7 PRO | SF10468.2 | Ø 170 mm, 22 mm hoch | Ø 155 mm | Ø 22 mm | 1 piece |
Care instructions:
Rinse off coarse polish residues by hand using lukewarm water. Gently knead the polish residues out of the pores with your thumbs. For deep cleaning, use an all-purpose cleaner such as Allround Cleaner or Multi Clean PLUS. Continue rinsing and kneading the polishing sponge until the water runs clear and no residues remain in the sponge. (Optional: Machine wash the polishing sponge at 40 °C.) After cleaning, shake the sponge thoroughly and allow it to air dry.
REVIEWS
Login
PRODUCT PROPERTIES
| Dimensionally stable under heat |
| Open-celled |
| Reinforced, 2-layer hook-and-loop velour backing |
AREAS OF APPLICATION
- Orbital polishers
GENERAL PRODUCT NOTE
This product information should and can only be taken as non-binding advice. The manufacturer does not accept any liability whatsoever. Before use, make sure that the product is suitable for your particular application.
DOWNLOADS
Zubehör
Medium Cut
Content: 0.25 Liter (€68.00* / 1 Liter)
Fine Cut
Content: 0.25 Liter (€66.00* / 1 Liter)
