Skip to main content Skip to search Skip to main navigation

PRODUCT DETAILS

PRODUCT DESCRIPTION

This transparent and high-strength surface coating from the servFaces line is a diverse and unique quality product for plastic surfaces. Plastic Coat -matt- provides optimum protection for untreated, natural plastic surfaces and forms semi-gloss effects!

The highly-transparent coating forms a long-acting protective film resistant to dirt and easy to clean with minimum consumption. Plastic Coat -matt- is resistant to temperatures up to +680 °C as well. Therefore, surfaces' fireproof properties will not be negatively affected. The product cannot be removed with conventional cleaning agents. servFaces Plastic Coat -matt- has a special integrated UV blocker which effectively protects untreated plastics from discoloration for a long time. 

servFaces Plastic Coat -matt- is very flexible up to a film thickness of 5 µm and it therefore cannot chip or peel off.

APPLICATION

  • Clean the surface with Surface Cleaner Ultima followed by Surface Cleaner Neutra to neutralize It
  • Put the application cloth onto the applicator.
  • Apply 12 - 18 drops of Plastic Coat -matt- onto the application cloth and spread it quickly on the surface (a visible film should form). Treat the surface in small sections (max. 50 x 50 cm).
  • Let the product dry for approx. 1 - 3 minutes! (The time depends on the applied quantity, air humidity and ambient temperature). The longer the product reacts on the surface, the thicker the coating and the greater the protective and hydrophobic effects.
  • Remove surplus material with a Special Coating Towel (peripheral areas first, then work from the outside in with straight quick motions). 
  • Take another fresh Special Coating Towel and polish the surface with slight pressure (peripheral areas first, then work from the outside in with circular motions).
  • Should streaks still be visible, take another fresh Special Coating Towel and repeat the procedure until the streaks are invisible. (Check with a light)
  • Recoating with Plastic Coat -matt- : possible after 20 minutes. Wait no longer than 35 minutes! 
  • The product can be applied by fine spraying, too. You will need clean, dry and oil-free compressed air for that! Contaminants in the compressed air can cause a pre-reaction of the product after which the treated surfaces become dull and rough. 

Caution: Do not apply the product in direct sunlight!

NOTES

Application temperature:   +15 °C to +35 °C
Application quantity:   3 - 5 ml per m²
Weatherproof after:   18 - 24 hours
Fully cured after:   9 - 10 days
pH resistance:   2 - 13
Storage temperature:   +10 °C to +25 °C
Storage and shelf life:   At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

NOTES

Application temperature: +15 °C to +35 °C
Application quantity: 3 - 5 ml per m²
Weatherproof after: 18 - 24 hours
Fully cured after: 9 - 10 days
pH resistance: 2 - 13
Storage temperature: +10 °C to +25 °C
Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

REVIEWS


PRODUCT PROPERTIES

Long-term protection
Resistant to cleaning agents and environmentally-stable (pH 2-13)
UV resistant and environmentally-stable
Unique colour depth
Very high hydrophobic properties

AREAS OF APPLICATION

  • Untreated or natural-finish plastic surfaces
Bildbeschreibung

LIFETIME APPROX. 24 - 36 MONTHS

One layer of has a lifetime of approx. 24 - 36 months. Each additional layer enhances the lifetime for a further 8 - 9 months. To achieve a longer protection time, you can apply the product in a fine spray pattern and leave to dry. In this way, you will obtain a dry film thickness of approx. 3 - 5 μm.

TO CONSIDER

Emulsions and coating products need a certain period of time to bind to the surface and fully cure. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product.

GENERAL PRODUCT NOTE

Factors such as preliminary cleaning, application temperature, curing time, etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

DOWNLOADS

  • Datasheet
  • Safety datasheets request
CLP-/REACH-Notice
Symbol
Flame: Flammable Corrosion: Corrosive Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
EUH208: Contains 3-aminopropyltriethoxysilane. May produce an allergic reaction.
H225: Highly flammable liquid and vapour.
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H336: May cause drowsiness or dizziness.
H412: Harmful to aquatic life with long lasting effects.
Verordnung (EG) Nr. 1272/2008 : n-Butylacetat; organische Polysilazan Verbindung.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of contents/container to Dispose of waste according to applicable legislation..

ACCESSORY

Accessory Items

slide 5 to 7 of 7