Skip to main content Skip to search Skip to main navigation

PRODUCT DETAILS

PRODUCT DESCRIPTION

The transparent and high-strength surface coating of the servFaces line is a diverse and unique quality product for a variety of metal surfaces such as copper, bronze, precious metals, non-ferrous metals, galvanized (zinc-plated) metals, stainless steel, ferrous metals and many more. It offers optimum protection for most diverse areas of application.

 

All-round talent for surface optimization

The highly-transparent coatings form a long-lasting protective layer resistant to scratches and dirt with minimum applied quantity. Hard-coated layers are suited especially to large-scale areas of application due to the low material consumption. Therefore, damage caused by resins, acids, salts, weather and mechanical impacts have no chance. Moreover, our high-strength hard-coated layers are exceptionally resistant to temperatures from +890 °C to +1800 °C (always according to the formulation). 

Fingerprints on stainless steel surfaces can be minimized by up to 90 % and removed with a wet cloth!

 

Nature Factor

Our goal is the development of high quality products that leave a positive long lasting impression, user friendly and safe to use and reduced impact on the environment. servFaces Metal Coating meets the requirements for food contacting articles and materials of the paragraphs 30 and 31 of the German Food, Article and Feed Law Book.

After curing, the coated surface does not pose any health risk and is allowed to get into contact with food.

This was confirmed by CBA GmbH with a certificate, that was issued on May 15, 2018. The complete certificate can be found in our shop under the tab Data sheets.

APPLICATION

The area to be treated should be clean and free of grease. The product can be applied on smooth surfaces with our applicator. You can remove any excess product with a microfiber cloth after a short reaction time of approx. 1 - 2 minutes. It is also optimal for use in a fine-spray pattern and rolling applications. To achieve the best results, the ambient temperature should be within the range of +5 °C to +35 °C. The product is dust-dry after 120 minutes. The product fully cures after approx. 6 - 8 days (depending on the temperature and air humidity). After curing, the coating is resistant to acids, alkaline solutions and solvents (pH 2 - 13).

NOTES

Technical explanations 

Metal Coating provides the following properties with a film thickness of 3 to 5 micrometers (film thickness depends on the application procedure).

  • Water-repellency of clean, empty, polished or painted surfaces (the surface must be free of silicone and grease. Suitable cleaning agents are servFaces Cleaner Ultima & Neutra). 
  • Optimizing of the coated substrate's surface hardness.
  • The coating has "self-healing" effects due to the unique manufacturing formulation (organic / inorganic components). No other coating system has this thermoelastic flow property. 
  • Even surfaces exposed to continuous stress of up to +1,050 °C can be successfully sealed thanks to the high proportion of inorganic matter. 
 This is only a short list of what it can do.

Application temperature:   +15 °C to +35 °C
Application quantity:   3 - 5 ml per m²
Weatherproof after:   24 hours
Fully cured after:   At ambient temperature: after approx. 6 to 8 days
pH resistance:   2 – 13
Storage temperature:   +10 °C to +25 °C
Storage and shelf life:   At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

NOTES

Technical explanations 

Metal Coating provides the following properties with a film thickness of 3 to 5 micrometers (film thickness depends on the application procedure).

  • Water-repellency of clean, empty, polished or painted surfaces (the surface must be free of silicone and grease. Suitable cleaning agents are servFaces Cleaner Ultima & Neutra). 
  • Optimizing of the coated substrate's surface hardness.
  • The coating has "self-healing" effects due to the unique manufacturing formulation (organic / inorganic components). No other coating system has this thermoelastic flow property. 
  • Even surfaces exposed to continuous stress of up to +1,050 °C can be successfully sealed thanks to the high proportion of inorganic matter. 
 This is only a short list of what it can do.

Application temperature: +15 °C to +35 °C
Application quantity: 3 - 5 ml per m²
Weatherproof after: 24 hours
Fully cured after: At ambient temperature: after approx. 6 to 8 days
pH resistance: 2 – 13
Storage temperature: +10 °C to +25 °C
Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

REVIEWS

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


PRODUCT PROPERTIES

Anti-graffiti effects and protection from nearly all acids, bases and organic solvents
Corrosion protection up to 10 years or longer
Does not contain siloxane, fluorine, Teflon, wax, silicone or carcinogenic additives
Extends cleaning intervals and reduces cleaning and care costs
Increases hardness and scratch resistance, very high abrasion resistance
Reduces fingerprints by up to 90 %
Transparent, invisible, flexible and permanent long-lasting coating
UV resistant and environmentally-stable

AREAS OF APPLICATION

  • Copper, Bronze, Precious metals, Non-ferrous metals, Galvanized (zinc-plated) metals, Stainless steel, Ferrous metals and many more
Bildbeschreibung

LIFETIME

The lifetime is 2 to 10 years, always according to the substrate, surface stress and film thickness

TO CONSIDER

Emulsions and coating products need a certain period of time to bind to the surface and fully cure after application. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product properties.

GENERAL PRODUCT NOTE

Factors such as preliminary cleaning, application temperature, curing time, etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

DOWNLOADS

  • Datasheet
  • Certificate
CLP-/REACH-Notice
Symbol
Flame: Flammable Corrosion: Corrosive Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
EUH208: Contains 3-Aminopropyltriethoxysilan; 3-(Triethoxysilan)-propan-1-amin. May produce an allergic reaction.
H225: Highly flammable liquid and vapour.
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H336: May cause drowsiness or dizziness.
H412: Harmful to aquatic life with long lasting effects.
Verordnung (EG) Nr. 1272/2008 : n-Butylacetat; organische Polysilazan Verbindung.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of contents/container to applicable legislation.

ACCESSORY

Accessory Items

servFaces - Applikator - Applikatorschwamm

Average rating of 0 out of 5 stars

Applicators 80 x 40 x 23 mm
Application sponge for applying servFaces coatings.
€15.00*

Content: 10 Piece (€1.50* / 1 Piece)

servFaces - Applikationstuch - Mikrofasertuch zum Auftragen von Beschichtungen

Average rating of 0 out of 5 stars

Applications Towels 10cm x 15cm
Special microfiber cloths for the processing of various surface coatings and glass seals.
€19.90*

Content: 50 Piece (€0.40* / 1 Piece)

servFaces - Special Coating Towel - Mikrofasertuch servFaces - Special Coating Towel - Mikrofasertuch

Average rating of 5 out of 5 stars

Special Coating Towels - Pack of 10
Microfiber cloths with seamless edge and special fiber structure
€16.00*

Content: 10 Piece (€1.60* / 1 Piece)

servFaces - Premium Applicator Sponges - Applikatorschwamm zum Auftragen von Beschichtungen servFaces - Premium Applicator Sponges - Applikatorschwamm zum Auftragen von Beschichtungen

Average rating of 5 out of 5 stars

Premium Applicator Sponges
Microfiber applicator
€11.90*

Content: 4 Piece (€2.98* / 1 Piece)

servFaces - Applicator Mitt - Applikatorschwamm zum Auftragen von Beschichtungen

Average rating of 0 out of 5 stars

Applicator Mitt
The servFaces Applicator Mitt guarantees uniform and cost-effective application of various servFaces coatings, car care products and waxes.
€8.90*

Content: 2 Piece (€4.45* / 1 Piece)