Hydro Ceramic Tire & Plastic GEL
Tire, Rubber & Plastic Care Gel
| Hersteller: | servFaces GmbH |
| Artikel-Nr.: | SF10419 |
€15.90
Delivery time: ca. 1-3 Days
PRODUCT DETAILS
PRODUCT DESCRIPTION
Hydro Ceramic Tire & Plastic GEL is a tire, rubber and plastic care gel based on Hydro Ceramic technology. The product is suitable for the care and protection of various exterior vehicle surfaces, such as tire sidewalls, rubber components and unpainted plastic parts. It can be used on automobiles, caravans, boats, in home care applications and on comparable exterior surfaces.
After application, the product leaves a deep black finish and a non-sticky, water-repellent surface. The easy-to-clean effect ensures that dirt and deposits can be removed effortlessly, making care and cleaning significantly easier.
APPLICATION
Apply the product to the previously cleaned and dry surface using the Applicator Puck or a suitable sponge applicator, then work it into the surface. Any product residues can be removed with a microfiber towel.
When applying the product to tire sidewalls, we recommend pre-cleaning with servFaces Tire Cleaner PRO to completely remove dirt and residues from previous care products. Only after this intensive cleaning process are rubber surfaces thoroughly clean and able to absorb fresh care and protection products.
Caution:
- Do not apply to surfaces where slipperiness is undesirable, e.g. pedals, steering wheels or tire treads. Check suitability and compatibility before use.
- Do not use in direct sunlight or on hot surfaces.
Note after use:
Surfaces treated with care products should always be cleaned as gently as possible to avoid damaging or removing the product. Avoid using strong cleaning agents with a high pH value or a high solvent content.
NOTES
| Application temperature: | +5 °C to +40 °C | |
| Application quantity: | 15 to 20 ml per m² | |
| Weatherproof after: | 30 minutes | |
| Fully cured after | 12 hours | |
| Storage temperature | +10°C to +25°C | |
| Storage and shelf life: | At least 24 months at room temperature when stored in tightly sealed original containers | |
| Caution: Protect the product from direct sunlight and freezing temperatures! |
NOTES
| Application temperature: | +5 °C to +40 °C |
| Application quantity: | 15 to 20 ml per m² |
| Weatherproof after: | 30 minutes |
| Fully cured after | 12 hours |
| Storage temperature | +10°C to +25°C |
| Storage and shelf life: | At least 24 months at room temperature when stored in tightly sealed original containers |
| Caution: Protect the product from direct sunlight and freezing temperatures! |
REVIEWS
Login
PRODUCT PROPERTIES
| Enhances color |
| Good water repellency |
| Leaves no greasy or sticky film on the surface |
| Long-lasting protection |
| Minimal consumption |
| Simple and quick application |
AREAS OF APPLICATION
- Plastic and rubber surfaces in the engine bay
- Tire sidewalls of all types of vehicles
- Various rubber components
DURABILITY
Depending on application and surface exposure, between 3 and 12 weeks.
TO CONSIDER
Emulsions and coating products require a certain amount of time after application to bond with the surface and cure completely. It is therefore essential to observe the curing times specified for the individual products. This is the only way to ensure that the product achieves the desired effect. If the surface is exposed to water, cleaning agents or similar substances directly after application, product performance may be significantly reduced.
GENERAL PRODUCT NOTE
Factors such as type of coating system, paint condition, product processing (preliminary cleaning, application temperature, curing time), etc., can influence the product's effectiveness and duration. Fluctuations of product properties cannot therefore be precluded.