Skip to main content Skip to search Skip to main navigation

PRODUCT DETAILS

PRODUCT DESCRIPTION

The transparent and high-strength surface coating of the servFaces line is a diverse and unique quality product for rim coating on all vehicles. It offers optimum protection on painted and unpainted surfaces of rims with a semi-gloss finish.

The highly-transparent coating forms a long-lasting protective film resistant to dirt and easy to clean with minimum consumption. Ceramic Coat Rims -matt- is resistant to temperatures up to +1050 °C as well. The product cannot be removed using conventional cleaning agents. Ceramic Coat Rims -matt- protects even from damage caused by leaking brake fluid thanks to the special integrated resin. 

Ceramic Coat Rims -matt- is very flexible up to a film thickness of 8 µm and therefore cannot chip or peel off.

APPLICATION

  • Clean the surface with Surface Cleaner Ultima followed by Surface Cleaner Neutra to neutralize. 
  • Put the application cloth onto the applicator. 
  • Apply 12 - 18 drops of Ceramic Coat Rims onto the application cloth and spread it quickly on the surface (a visible film should form). Treat the surface in small sections (max. 50 x 50 cm).
  • Let the product dry for approx. 1 - 3 minutes! (The time depends on the applied quantity, air humidity and ambient temperature). The longer the product reacts on the surface, the thicker the coating and the greater the protective and hydrophobic effects. 
  • Remove surplus material with a Special Coating Towel (peripheral areas first, then work from the outside in with straight quick motions).
  • Take another, fresh Special Coating Towel and polish the surface with slight pressure (peripheral areas first, then work from the outside in with circular motions).
  • Should streaks still be visible, take another fresh Special Coating Towel and repeat the procedure until the streaks are invisible (check with a light).
  • Recoating with Ceramic Coat Rims: possible after 20 minutes. Wait no longer than 35 minutes!
  • The product can be applied by in a fine spray pattern, too. You will need clean, dry and oil-free compressed air for that! Contaminants in the compressed air can cause s pre-reaction of the product after which the treated surfaces become dull and rough.

Caution: Do not apply the product in direct sunlight!

NOTES

Application temperature:   +15 °C to +35 °C
Application quantity:   3 - 5 ml per m²
Weatherproof after:   18 - 24 hours
Fully cured after:   9 - 10 days
pH resistance:   2 - 13
Storage temperature:   +10 °C to +25 °C
Storage and shelf life:   At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

NOTES

Application temperature: +15 °C to +35 °C
Application quantity: 3 - 5 ml per m²
Weatherproof after: 18 - 24 hours
Fully cured after: 9 - 10 days
pH resistance: 2 - 13
Storage temperature: +10 °C to +25 °C
Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

REVIEWS

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


PRODUCT PROPERTIES

Easy-to-clean surfaces
Long-term protection
Resistant to cleaning agents and environmentally-stable (pH 2-13)
Resistant to temperatures from -50°C to 1050°C
UV resistant and environmentally-stable
Very high hydrophobic properties

AREAS OF APPLICATION

  • Lacquered and powder-coated rims
Bildbeschreibung

LIFETIME APPROX. 30 - 36 MONTHS

One layer has a lifetime of approx. 30 - 36 months (manual washing). Each additional layer enhances the lifetime by a further 8 - 9 months. To achieve a longer protection time, you can apply the product in a fine spray pattern and leave to dry. In this way, you will obtain a dry film thickness of approx. 3 - 5 µm.

TO CONSIDER

Emulsions and coating products need a certain period of time to bind to the surface and fully cure. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product.

GENERAL PRODUCT NOTE

Factors such as preliminary cleaning, application temperature, curing time, etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

DOWNLOADS

  • Datasheet
CLP-/REACH-Notice
Symbol
Flame: Flammable Corrosion: Corrosive Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
EUH208: Contains 3-aminopropyltriethoxysilane. May produce an allergic reaction.
H225: Highly flammable liquid and vapour.
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H336: May cause drowsiness or dizziness.
H412: Harmful to aquatic life with long lasting effects.
P102: Keep out of reach of children.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of contents/container to applicable legislation.

ACCESSORY

Accessory Items

servFaces - Applikationstuch - Mikrofasertuch zum Auftragen von Beschichtungen

Average rating of 0 out of 5 stars

Applications Towels 10cm x 15cm
Special microfiber cloths for the processing of various surface coatings and glass seals.
€19.90*

Content: 50 Piece (€0.40* / 1 Piece)

servFaces - Applikator - Applikatorschwamm

Average rating of 0 out of 5 stars

Applicators 80 x 40 x 23 mm
Application sponge for applying servFaces coatings.
€15.00*

Content: 10 Piece (€1.50* / 1 Piece)

servFaces - Special Coating Towel - Mikrofasertuch servFaces - Special Coating Towel - Mikrofasertuch

Average rating of 5 out of 5 stars

Special Coating Towels - Pack of 10
Microfiber cloths with seamless edge and special fiber structure
€16.00*

Content: 10 Piece (€1.60* / 1 Piece)

servFaces - Premium Applicator Sponges - Applikatorschwamm zum Auftragen von Beschichtungen servFaces - Premium Applicator Sponges - Applikatorschwamm zum Auftragen von Beschichtungen

Average rating of 5 out of 5 stars

Premium Applicator Sponges
Microfiber applicator
€11.90*

Content: 4 Piece (€2.98* / 1 Piece)

servFaces - Applicator Mitt - Applikatorschwamm zum Auftragen von Beschichtungen

Average rating of 0 out of 5 stars

Applicator Mitt
The servFaces Applicator Mitt guarantees uniform and cost-effective application of various servFaces coatings, car care products and waxes.
€8.90*

Content: 2 Piece (€4.45* / 1 Piece)

servFaces - Surface Cleaner Ultima - Die korrekte Vorreinigung vor einer Beschichtung - 500 ml Flasche mit Sprühkopf

Average rating of 0 out of 5 stars

Surface Cleaner Ultima
servFaces surface cleaning before sealing/coating
€19.00*

Content: 0.5 Liter (€38.00* / 1 Liter)

servFaces - Surface Cleaner Neutra - Die korrekte Vorreinigung vor einer Beschichtung - 500 ml Flasche mit Sprühkopf

Average rating of 0 out of 5 stars

Surface Cleaner Neutra
servFaces surface cleaning before sealing/coating
€15.00*

Content: 0.5 Liter (€30.00* / 1 Liter)