Area of application: For all glass surfaces, both pure as well as untreated surfaces, on watercraft such as recreational craft, yachts, sailboats and many more.

Yacht Window Coating-nur für Gewerbe

  • servFaces GmbH
  • SF10088

Delivery time approx. 5 working days

Allround Towels - 5er Pack Allround Towels - 5er Pack
Content 5 Piece (€4.70 * / 1 Piece)
€23.50 *
Special Coating Towels - 10er Pack Special Coating Towels - 10er Pack
Content 10 Piece (€1.40 * / 1 Piece)
From €14.00 *
Surface Cleaner Neutra Surface Cleaner Neutra
Content 0.5 Liter (€30.00 * / 1 Liter)
From €15.00 *
  YACHT Coatings servFaces Yacht Coating technology is suitable for many types of... more
Product information "Yacht Window Coating-nur für Gewerbe"

 

YACHT Coatings

servFaces Yacht Coating technology is suitable for many types of water vessel surfaces. The transparent and highly resistant surface coating from the servFaces product range is a diverse and unique quality product. Yacht Coatings provides optimum protection for a wide range of surfaces

Multi-Talent for Surface Optimisation
The highly transparent coating forms a long acting, scratch and dirt resistant and easy-to-clean protective layer with the minimum amount of product. The product, once in its final cured state, is resistant against acids, salt water, weathering, resins and mechanical stress. Yacht Coatings are strong, hard and extremely heat-resistant up to +1800°C. Thus, the fire properties of the treated surface are not affected.

Nature Factor
Our goal is the development of high quality products that leave a positive long lasting impression, user friendly and safe to use and reduced impact on the environment.

Characteristics:

  • Transparent, non-visible, flexible and permanent long lasting coating
  • Free of Siloxane, fluorine, Teflon, wax, silicone & carcinogenic additives
  • Resistant to UV-radiation
  • Anti-Graffiti effect and protection against almost all acids and bases, as well as organic solvents
  • Temperature resistant from -50°C to +1090°C
  • Resistant against chemicals
  • Resistant to weathering
  • Non-flammable / Non-corrosive
  • Resistant to salt water
  • Corrosion protection
  • Increased scratch and abrasion resistance
  • Easy-to-clean surface

Technical Information:
Yacht Coatings display the following properties with a coating thickness of approximately 3-5 µm; thickness is dependent on the application method.

  1. Hydrophobicity of clean, bare, polished or painted surfaces. Prior to coating the surface must be free of oil, grease and silicone. Use appropriate cleaning agents such as servFaces Cleaner Ultima & Neutra
  2. Optimization of surface hardness of the coated surface
  3. Through the unique formulation of the product (organic / inorganic components) the coating displays ‘Self-Healing’ properties
  4. The high inorganic content, surfaces can be successfully sealed and resistant to temperatures up to 1050°C

Note: The above is only a brief overview of the products characteristics / properties; consult your servFaces application specialists for more information.

Application:
The surface to be treated must be clean and free from oil, grease and silicone contaminants. On smooth surfaces the product can be applied using servFaces applicators and cloths. After a short reaction time of approximately 1 - 2 minutes the excess product can be either removed using a microfiber cloth (Special Coating Towels) or be polished out using a servFaces Premium Soft Towel. Product application using a fine-spray process provides an optimal result; on rough and absorbent surfaces the product can be applied using either rolling or spraying processes. The ambient temperature should be between +5°C to +35°C to achieve optimal results. After 120 minutes the product is dry and non-tacky.

After the complete curing cycle (see below), the coating is resistant to acids, alkalis and solvents (pH value 2-13).

Important:
After the coating process, the product requires a minimum of 18 – 24 hours to initially cure in order to protect against dirt and humidity. Complete protection requires a curing time of 6 – 8 days, alternate curing processes can reduce the curing time by 2 – 3 days; consult your servFaces application specialists for more information.

Product Overview
Yacht Paint Coating: 250ml / 500ml / 1000ml / 5000ml
This product is suitable for use on all gel coat and painted surfaces on water vessels, such as boats, yachts, sailing boats, speed boats and many more. The product is also suitable for natural finish plastic surfaces.

Yacht Metall Coating: 250ml / 500ml / 1000ml / 5000ml
This product is suitable for use on all natural finish and untreated metal surfaces on water vessels, such as boats, yachts, sailing boats, speed boats and many more.

Yacht Window Coating: 250ml / 500ml / 1000ml / 5000ml
This product is suitable for use on all natural finish and untreated glass, acrylic and polycarbonate surfaces on water vessels, such as boats, yachts, sailing boats, speed boats and many more.

Usage: 3 - 5 ml / m² dependent on material absorption rate
Curing Time: initial protection 18 to 24 hours at +20°C / complete protection approximately 6 – 8 days
Humidity: 30% - 80%
Application Temperature: +10°C to +35°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C
Always protect the product from direct sunlight and frost. 

During the curing and hardening process the surface should not be subjected to frictional mechanical stresses.

 

Application: Sealing
Field: AERO, Boats and Yachts
Related links to "Yacht Window Coating-nur für Gewerbe"
Product information "Yacht Window Coating-nur für Gewerbe"

GHS02 GHS05 GHS07

Hazard statements

H225 Highly flammable liquid and vapour.
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.

 

Precautionary statements

Prevention:
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 Wear protective gloves/ protective clothing/eye protection/face protection
Response:
P303
P361
P353
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304
P340
P310
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician.
P305
P351
P338
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370
P378
In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.
Read, write and discuss reviews... more
Customer evaluation for "Yacht Window Coating-nur für Gewerbe"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Viewed