Ceramic Coat Rims
Surface coating for various types of rims
Delivery time: ca. 1-3 Days
PRODUCT DETAILS
PRODUCT DESCRIPTION
The transparent and high-strength surface coating of the servFaces line is a diverse and unique quality product for rim coating on all vehicles. It offers optimum protection on painted and unpainted surfaces of rims with enormous gloss enhancement.
The highly-transparent coating forms a long-lasting protective film resistant to dirt and easy to clean with minimum consumption. Ceramic Coat Rims is also resistant to temperatures up to +1050°C. The product cannot be removed using conventional cleaning agents. Ceramic Coat Rims protects even from damage caused by leaking brake fluid thanks to the special integrated resin.
Ceramic Coat Rims is very flexible up to a film thickness of 8 µm and therefore cannot chip or peel off.
APPLICATION
- Clean the surface with Surface Cleaner Ultima followed by Surface Cleaner Neutra to neutralize.
- Put the application cloth onto the applicator.
- Apply 12 - 18 drops of Ceramic Coat Rims onto the application cloth and spread it quickly on the surface (a visible film should form). Treat the surface in small sections (max. 50 x 50 cm).
- Let the product dry for approx. 1 - 3 minutes! (The time depends on the applied quantity, air humidity and ambient temperature). The longer the product reacts on the surface, the thicker the coating and the greater the protective and hydrophobic effects.
- Remove surplus material with a Special Coating Towel (peripheral areas first, then work from the outside in with straight quick motions).
- Take another, fresh Special Coating Towel and polish the surface with slight pressure (peripheral areas first, then work from the outside in with circular motions).
- Should streaks still be visible, take another fresh Special Coating Towel and repeat the procedure until the streaks are invisible (check with a light).
- Recoating with Ceramic Coat Rims: possible after 20 minutes. Wait no longer than 35 minutes!
- The product can be applied by in a fine spray pattern, too. You will need clean, dry and oil-free compressed air for that! Contaminants in the compressed air can cause s pre-reaction of the product after which the treated surfaces become dull and rough.
Caution: Do not apply the product in direct sunlight!
NOTES
| Application temperature: | +15 °C to +35 °C | |
| Application quantity: | 3 - 5 ml per m² | |
| Weatherproof after: | 18 - 24 hours | |
| Fully cured after: | 9 - 10 days | |
| pH resistance: | 2 - 13 | |
| Storage temperature: | +10 °C to +25 °C | |
| Storage and shelf life: | At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright. | |
| Caution: Protect the product from direct sunlight and freezing temperatures! |
NOTES
| Application temperature: | +15 °C to +35 °C |
| Application quantity: | 3 - 5 ml per m² |
| Weatherproof after: | 18 - 24 hours |
| Fully cured after: | 9 - 10 days |
| pH resistance: | 2 - 13 |
| Storage temperature: | +10 °C to +25 °C |
| Storage and shelf life: | At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright. |
| Caution: Protect the product from direct sunlight and freezing temperatures! |
REVIEWS
Login
PRODUCT PROPERTIES
| Easy-to-clean surfaces |
| Long-term protection |
| Resistant to temperatures from -50°C to 1050°C |
| Simple application |
| UV resistant and environmentally-stable |
| Unique gloss and color depth |
| Very high hydrophobic properties |
AREAS OF APPLICATION
- Chrome rims
- Gloss & matt coatings
- High-gloss rims
- Lacquered and powder-coated rims
LIFETIME APPROX. 30 - 36 MONTHS
One layer has a lifetime of approx. 30 - 36 months (manual washing). Each additional layer enhances the lifetime by a further 8 - 9 months. To achieve a longer protection time, you can apply the product in a fine spray pattern and leave to dry. In this way, you will obtain a dry film thickness of approx. 3 - 5 µm.
TO CONSIDER
Emulsions and coating products need a certain period of time to bind to the surface and fully cure. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product.
GENERAL PRODUCT NOTE
Factors such as preliminary cleaning, application temperature, curing time, etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.
DOWNLOADS
Accessory Items
Content: 10 Piece (€1.50* / 1 Piece)
Content: 50 Piece (€0.40* / 1 Piece)
Content: 10 Piece (€1.60* / 1 Piece)
Content: 2 Piece (€4.45* / 1 Piece)
Content: 0.5 Liter (€38.00* / 1 Liter)
Content: 0.5 Liter (€30.00* / 1 Liter)