For all unpainted plastic surfaces of the automobile. Product life approx. 24-36 months / consumption approx. 8-10 ml / m²
Delivery time approx. 5 working days
Plastic Coat is a coating technology for many types of surfaces. The transparent and highly resistant surface coating from the servFaces product range is a diverse and unique quality product. Plastic Coat provides optimum protection for untreated and natural plastic surfaces.
Multi-Talent for Surface Optimisation
The highly transparent coating forms a long acting, dirt resistant and easy-to-clean protective layer with the minimum amount of product. Plastic Coat is extremely heat-resistant up to +680°C. Thus, the fire properties of the treated surface are not affected. Acids or strong cleaning chemicals cannot remove the product. ServFaces Plastic Coat has integrated special UV-blockers, which effectively protects untreated plastics over a long period of time.
servFaces Plastic Coat is very flexible up to a maximum thickness 5 µm. This unique characteristic prevents the product from cracking and flaking during expansion or contraction of the treated surface.
Our goal is the development of high quality products that leave a positive long lasting impression, user friendly and safe to use and reduced impact on the environment.
- Transparent, non-visible long lasting coating
- Fluorine-free and resistant to UV-radiation
- Anti-Graffiti effect and protection against almost all acids and bases, as well as organic solvents
- Temperature resistant from -50°C to +680°C maximum
- Resistant against chemicals
- Resistant to weathering
- Non-flammable / Non-corrosive
- Resistant to scratches
- Self-cleaning characteristics
- Easy-to-clean surface
The surface to be treated must be clean and free from oil and fat contaminants. Clean the surface using Surface Cleaner Ultima and Surface Cleaner Neutra. On smooth surfaces the product can be applied using servFaces applicators and cloths. After a short reaction time of approximately 1 minute the excess product can be either removed using a microfiber cloth (Special Coating Towels) or be polished out using a servFaces Premium Soft Towel. The product is suitable to be used in the fine-spray application process. The ambient temperature should be between +10°C to +35°C to achieve optimal results. After 120 minutes the product is dry and non-tacky.
After the complete curing cycle (see below), the coating is resistant to acids, alkalis and solvents. (pH value 2-13).
After the coating process, the product requires a minimum of 18 – 24 hours to initially cure in order to protect against dirt and humidity. Complete protection requires a curing time of 6 – 8 days, alternate curing processes can reduce the curing time by 2 – 3 days; consult your servFaces application specialists for more information.
Usage: 3 - 5 ml / m²
Curing Time: initial protection 18 to 24 hours at +20°C / complete protection approximately 6 – 8 days
Application Temperature: +10°C to +35°C
Storage and Shelf Life: at least 12 months at room temperature sealed in its original container.
Storage Temperature: +10°C to +25°C
Always protect the product from direct sunlight and frost.
During the curing and hardening process the surface should not be subjected to frictional mechanical stresses.
|Field:||Cars, Motorbikes, Caravans, Buses and Vans, Industry and Crafts, Trains and Trams|
|Product Type:||Surface Coatings|
|H225||Highly flammable liquid and vapour.|
|H302||Harmful if swallowed.|
|H314||Causes severe skin burns and eye damage.|
|H317||May cause an allergic skin reaction.|
|H412||Harmful to aquatic life with long lasting effects.|
|P210||Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.|
|P280||Wear protective gloves/ protective clothing/eye protection/face protection|
|IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.|
|IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER or doctor/ physician.|
|IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.|
|In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to extinguish.|