Skip to main content Skip to search Skip to main navigation

PRODUCT DETAILS

PRODUCT DESCRIPTION

servFaces Aero Coating technology is suitable for many types of aircraft surfaces. The transparent and highly resistant surface coating from the servFaces product range is a diverse and unique quality product. Aero Coatings provides optimum protection for a wide range of surfaces.

Multi-Talent for Surface Optimisation
The highly transparent coating forms a long acting, scratch and dirt resistant and easy-to-clean protective layer with the minimum amount of product. The product, once in its final cured state, is resistant against acids, salt water, weathering, resins and mechanical stress. Aero Coatings are strong, hard and extremely heat-resistant up to +1090 °C. Thus, the fire properties of the treated surface are not affected.  

Nature Factor
Our goal is the development of high quality products that leave a positive long lasting impression, user friendly and safe to use and reduced impact on the environment. 

APPLICATION

Clean the area to be treated and remove any grease. The product can be applied on smooth surfaces with our applicator. After a short reaction time of approx. 1 - 2 minutes, remove or polish any excess product residues with a microfiber cloth. Aero Coating is also ideal for fine spraying application. The product can be applied by spraying or rolling on rough and absorptive substrates. To achieve the best results, the ambient temperature should be within a range of +10 °C - +35 °C. The coating is dust-dry after 120 minutes.

The product is fully cured after approx. 6 - 8 days (depending on the temperature and air humidity). After curing, the coating is resistant to acids, alkaline solutions and solvents (pH 2 - 13).

Important:

  • Protect the surface after treatment for at least 18 - 24 hours from dirt and moisture. 
  • Curing time can be shortened by approx. 2 - 3 days using separate drying.
  • Air humidity must be within the range of 30 % to 80 %
  • Consumption: smooth surfaces 3 - 8 ml / m2 absorptive/open-pored surfaces (absorbent 1-layer paints) 5 - 7 ml / m² 
  • The surface must not be exposed to any abrasion during curing!

NOTES

Technical explanations 

Aero Coating guarantees the following properties with a film thickness of 3 - 5 micrometers (the film thickness depends on the application procedure): 

  • Water-repellency of clean, uncoated, polished or painted surfaces. (The surface must be free of silicone and grease. Suitable cleaning agents are servFaces Cleaner Ultima & Neutra) 
  • Optimizing of the coated substrate's surface hardness. 
  • The coating has "self-healing" effects due to the unique manufacturing formulation (organic / inorganic components). No other coating system has these thermoelastic flow properties.
  • Even parts exposed to a continuous stress of up to 1,050°C can be successfully sealed due to the high proportion of inorganic matter. This list is only a brief performance description.

Application temperature:   +10 °C to +35 °C
Application quantity:   3 – 8 ml per m²
Weatherproof after:   18 to 24 hours at +20 °C
Fully cured after:   Approx. 6 - 8 days
pH resistance:   pH 2 – 13
Storage temperature:   +10 °C to +25 °C
Storage and shelf life:   At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

NOTES

Technical explanations 

Aero Coating guarantees the following properties with a film thickness of 3 - 5 micrometers (the film thickness depends on the application procedure): 

  • Water-repellency of clean, uncoated, polished or painted surfaces. (The surface must be free of silicone and grease. Suitable cleaning agents are servFaces Cleaner Ultima & Neutra) 
  • Optimizing of the coated substrate's surface hardness. 
  • The coating has "self-healing" effects due to the unique manufacturing formulation (organic / inorganic components). No other coating system has these thermoelastic flow properties.
  • Even parts exposed to a continuous stress of up to 1,050°C can be successfully sealed due to the high proportion of inorganic matter. This list is only a brief performance description.

Application temperature: +10 °C to +35 °C
Application quantity: 3 – 8 ml per m²
Weatherproof after: 18 to 24 hours at +20 °C
Fully cured after: Approx. 6 - 8 days
pH resistance: pH 2 – 13
Storage temperature: +10 °C to +25 °C
Storage and shelf life: At least 12 months at ambient temperature in tightly sealed original containers, with containers standing upright.
  Caution: Protect the product from direct sunlight and freezing temperatures!

REVIEWS

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


PRODUCT PROPERTIES

Anti-graffiti effects and protection from nearly all acids, bases and organic solvents
Increases hardness and scratch resistance
Resistant to chemicals (pH 2-13)
Saltwater-proof
Transparent, invisible, flexible and permanent long-lasting coating
UV resistant and environmentally-stable

AREAS OF APPLICATION

  • Aircraft surfaces

TO CONSIDER

Emulsions and coating products need a certain period of time to bind to the surface and fully cure after application. Therefore, please check the curing time of individual products. Only this can guarantee that the product provides the desired benefits. Direct exposure of the surface to water or cleaning agents after application can significantly reduce the performance of the product properties.

GENERAL PRODUCT NOTE

Factors such as the type of coating system, paint condition, product processing (preliminary cleaning, application temperature, curing time), etc., can influence the product's effectiveness and lifetime. Therefore, fluctuations of product properties cannot be excluded.

DOWNLOADS

CLP-/REACH-Notice
Symbol
Flame: Flammable Corrosion: Corrosive Exclamation Mark: Health hazard/Hazardous to the ozone layer
Signalword
Danger!
EUH208: Contains 3-aminopropyltriethoxysilane. May produce an allergic reaction.
H225: Highly flammable liquid and vapour.
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H336: May cause drowsiness or dizziness.
H412: Harmful to aquatic life with long lasting effects.
Verordnung (EG) Nr. 1272/2008 : n-Butylacetat; organische Polysilazan Verbindung.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501: Dispose of contents/container to applicable legislation.

ACCESSORY

Accessory Items

servFaces - Special Coating Towel - Mikrofasertuch servFaces - Special Coating Towel - Mikrofasertuch

Average rating of 5 out of 5 stars

Special Coating Towels - Pack of 10
Microfiber cloths with seamless edge and special fiber structure
€16.00*

Content: 10 Piece (€1.60* / 1 Piece)

servFaces - Premium Applicator Sponges - Applikatorschwamm zum Auftragen von Beschichtungen servFaces - Premium Applicator Sponges - Applikatorschwamm zum Auftragen von Beschichtungen

Average rating of 5 out of 5 stars

Premium Applicator Sponges
Microfiber applicator
€11.90*

Content: 4 Piece (€2.98* / 1 Piece)

servFaces - Surface Cleaner Ultima - Die korrekte Vorreinigung vor einer Beschichtung - 500 ml Flasche mit Sprühkopf

Average rating of 0 out of 5 stars

Surface Cleaner Ultima
servFaces surface cleaning before sealing/coating
€19.00*

Content: 0.5 Liter (€38.00* / 1 Liter)

servFaces - Surface Cleaner Neutra - Die korrekte Vorreinigung vor einer Beschichtung - 500 ml Flasche mit Sprühkopf

Average rating of 0 out of 5 stars

Surface Cleaner Neutra
servFaces surface cleaning before sealing/coating
€15.00*

Content: 0.5 Liter (€30.00* / 1 Liter)